AR2-SW25的倒相式音箱配备了两只15”单元。它能输出拥有超强冲击力，极高灵敏度，低热能耗并尽可能地降低失真度。其革命性设计的出风口外形，可确保让气流成层流状运动，且即使在最高能级输出工作室仍能有效减少扰流噪声。如此多的优点组合在一起，使AR2-SW25的音质在精确度和音乐艺术性上获益良多。音箱箱体是由一级分类俄罗斯的桦木复合板制成，可最大化地确保音质和机械结构的一致性。

AR2-SW25's reverse phase speaker is equipped with two 15 "units. It can output with super impact, high sensitivity, low heat energy consumption and reduce distortion as much as possible. Its revolutionary design of the air outlet shape, can ensure that the air flow into a laminar flow, and even in the highest level output studio can effectively reduce the noise disturbance. So many advantages together, so that the sound quality of the AR2-SW25 benefit in precision and artistry of music. The box body is made of birch wood composite board of a classification of Russia, to ensure maximum consistency and quality of mechanical structure.

AR2-SW25的4点安装系统与箱体浑然一体，能完全匹配AR2系统。AR2-SW25超低频音响可以单独吊挂作阵列，或放在AR1垂直线阵的顶端。

AR2-SW25 4 installation system and the box can completely match the AR2 system all blend into one harmonious whole. AR2-SW25 ultra low frequency sound can be suspended alone or in the AR1 array, the top of the vertical linear array.

AR2-SW25须使用TP系列功放进行驱动放大。TP系列功放控制器可确保整套扬声系统的线性一致，为系统提供足够的保护，使系统在不同配置下的性能达至最佳状态，当然也涵盖了出厂预置模式的等响曲线和投射。

AR2-SW25 must use the TP series amplifier to drive amplification. TP series power amplifier controller can ensure the consistent set of linear loudspeaker system, provide adequate protection for the system, the system performance under different configurations up to the best, of course also covers the factory preset mode curve and projection.